There are 3 ways to print the model from Weaver3 Studio.
1. Using USB memory
① Save the file using save button, or Click 'File' on top menu bar and select 'Save as W3S file'.
② Copy saved file to USB memory.
③ Plug USB memory on USB port of printer front side, select saved file from screen and proceed print job.
2. Using Network
※ Note
Printer should be connected on network to use this feature.
① Click 'Print' button on right bottom of the Weaver3 Studio program.
② Check printer status first, then click 'Print' button on bottom to transmit printing file to the printer.
③ Click 'OK' button when file transmission done, to initiate printing job on the printer.
3. Using Local Connection
※ Note
Printer should be connected with PC that running Weaver3 Studio via USB cable to use this feature.
① Connect printer with PC which running Weaver3 Studio that proceed printing job, using USB connection cable.
② Select connected printer from printer control screen.
③ Click 'Print' button on right bottom of the Weaver3 Studio program.
④ Check printer status first, then click 'Print' button on bottom to transmit printing file to the printer.
⑤ Click 'OK' button when file transmission done, to initiate printing job on the printer.