type A530 Industrial 3D Printer Safety Precaution

Please make sure to follow these safety instructions for industrial 3d printer, type A530 and its filament station, smartStation™

Be sure to observe the following instructions when using the device.

1. type A530

• Directly plug the power cord in the receptacle on the wall. Do not use extension cord.
• If the power cable or plug is worn or damaged, pull out the power plug.
• The exposure of the interior of the machine can cause electric shock or burns. Do not remove covers or screws other than specified in this manual.
• Please be cautious. In the process of printing, the temperature of the nozzle and the heated bed rise higher than 100 degrees celsius.
• Do not place the machine in a highly moist environment as it may cause deformation and malfunction.
• Avoid contact of electrical terminal with metal product such as necklaces, coins, keys, watches, etc.
• Do not hold the shaft for lifting or moving of the printer.
• For the following situations turn off power and pull out the power plug
  - When in contact with liquid
  - When in need for a service or repair request
  - When the device cover is damaged
• For the method of disposal contact local service center or use a proper collection site.
• Please turn off power when leaving the office after business hours or in circumstances where machine is unoccupied for a long period of time as it may cause abrupt fire accidents.
  
  

• Protect device from humid or wet conditions eg. rain, snow, etc
• Remove power cord from receptacle on the wall before moving device.
• Be careful not to damage power cord while device is being translocated.
• When removing the power cord, please pull the plug and not the power cable.
• Be cautious of clips, staples and any other small metal objects from falling inside the device.
• Please be cautious on safety when touching the interior of the machine, e.g. cleaning the interior.
• Do not dispose of device or consumables together with household waste.
• For the method of disposal, please contact local service center or use a proper collection site.
• Interior of device may be very hot. Please do not touch the part with “Caution: High Temperature” sign or its surrounding areas as it may cause burns.
• Our product maintains high quality standards and performance.
  It is recommended to use genuine components only, components can be acquired from any authorized distributors.
• This machine is not suitable for use in areas that are easily accessible by children.

2. smartStation™

• Do NOT place the product in a humid place because it may cause deformation or malfunction of the product.
• Be careful NOT to let metal items such as necklaces, coins, keys, and watches come into contact with the electrical terminals.
• Do NOT lift or move the product by holding its internal parts.
• Do not lean on the 1st table, climb on the table, or exceed the specified load.
  The work table may fail to operate or the product may fall forward.
• Do not lean on the 2nd drawer, climb on the drawer, or press the drawer using your hands with force.
  The drawer may fail to operate or the product may fall forward.
• Do not lean on the 3rd drawer, climb on the drawer, or put anything exceeding the specified load.
  The drawer may fail to operate or the product may fall forward.
• When opening or closing the drawer, be careful not pinch your hands or any part of your body.
• When moving the product, be careful not to get your feet or body parts caught by its wheels.
• When moving the product by pushing, check if there are irregularities on the floor.
  The wheels may get caught in the irregularities, and the product may fall down.
• When moving the product by pushing, check if the smartStaionTM ‘s table and drawer and fabWeaver type A530 door are closed. If they are opened when the product is moved, the product may fall down.
• Place the product on the flat floor. If the product is installed on a slope, it may fall down.