How to Remove Industrial 3D Printer Filament Piece Stuck in the Filament Box Connection Tube

If the filament breaks at the connection tube in the filament box, please refer to the following method. Open the filament box and cut the filament near the insertion hole...

 

1. Open the filament box and cut the filament near the insertion hole. Secure the end of the filament as shown below and store it..

Be careful not to unwind the filament when cutting the filament end.

It may cause entanglement of the filament. .

 

2. Remove the tube from the back of the filament box. 

 

3. Pull out each cut parts to take out remaining filament from the filament box side and the machine side.

 

4. After removing all filament, reassemble the tube to the filament box.